Tashar Ramin
-
Tallafin Tashar Jirgin Ruwa ta Qinkai Q195 Q235B mai galvanized C Channel Strut
Gabatar da Siffofi Masu Zane-zane na Galvanized C - wani abu mai amfani da inganci don amfani iri-iri na gini da masana'antu. Wannan samfurin mai inganci ya haɗa ƙarfi da juriya, wanda hakan ya sa ya dace da tallafi da firam ɗin gini.
Ana ƙera ƙarfen mu mai siffar C mai siffar galvanized ta amfani da kayan aiki masu inganci da fasahar galvanizing ta zamani, wanda ke tabbatar da kyakkyawan juriya ga tsatsa da tsawon rai. Wannan muhimmin fasalin ba wai kawai yana tabbatar da ingancin tashar ba, har ma yana rage farashin gyara da kuma tsawaita tsawon rayuwar aikin gaba ɗaya.
-
Tashar Ramin Qintai Ribbed tare da Alloy na Aluminum na Bakin Karfe
Ana amfani da hanyoyin C galibi don hawa, ɗaurewa, tallafawa da haɗa nauyin tsarin mai sauƙi a cikin gine-gine. Waɗannan sun haɗa da bututu, wayoyin lantarki da bayanai, tsarin injina kamar iska da sanyaya iska, tsarin ɗora panel ɗin hasken rana.
Ana amfani da shi don wasu aikace-aikacen da ke buƙatar tsari mai ƙarfi, kamar rack na kayan aiki, benci na aiki, tsarin shiryayye da sauransu.Tashar Strut tana ba da tallafi mai sauƙi ga wayoyi, famfo, ko kayan aikin injiniya. Tana da leɓuna masu fuskantar ciki don haɗa goro, kayan ƙarfafawa, ko kusurwoyi masu haɗawa don haɗa tsawon tashoshin strut tare. Haka kuma ana amfani da ita don haɗa bututu, waya, sandunan zare, ko ƙusoshi zuwa bango. Yawancin tashar strut tana da ramuka a tushe don sauƙaƙe haɗin kai ko don ɗaure tashar strut zuwa gine-ginen gini. Tashar Strut tana da sauƙin haɗawa da gyara, kuma ana iya haɗa nau'ikan tashoshi daban-daban da daidaita su. Ana amfani da ita galibi a masana'antar lantarki da gini. Ana iya amfani da tashar Strut don ƙirƙirar tsari na dindindin wanda ke tallafawa wayoyi a kusa da wani kadara, ko kuma yana iya adana nau'ikan injuna da wayoyi daban-daban na ɗan lokaci don ayyukan ɗan gajeren lokaci. -
Maƙallan rataye faranti na rufin Qinkai don Sandar Zaren Sandar Zaren Sandar
Sandar Zare, wadda aka fi sani da All Thread, ATR, Redi-Rod, Threaded Bar, da Stud, ainihin dogon ƙulli ne wanda ba shi da kai. Haka kuma ana amfani da shi don ɗaure komai daga ƙullin anga, zuwa dakatar da kayan lantarki ko famfo daga rufi kuma galibi ana amfani da shi wajen amfani da rufin da aka sauke.
-
Tashar c mai ramuka a cikin bututun ƙarfe ta Qinkai 41*41 GI
Tashar c mai ramin ƙarfe 41*41 GI
Girman Tashar C mai Slotted Steel Strut tare da takardar shaidar UL.unistrut c channel unistrut c channel unistrut c channel
1. Kauri na yau da kullun: 1.5 mm, 1.6 mm, 2 mm, 2.3 mm, 2.5 mm, 2.75 mm.
2. Tsawon da aka saba: 3000 mm, 6000 mm kuma an keɓance shi.unistrut c channel unistrut c channel unistrut c channel
3. Girman da aka saba: 41*21, 41*25, 41*41,41*62,41*82, baya zuwa baya, 41*41.41*62,41*123 da sauransu
Ana samar da wasu girma dabam bisa ga zane na abokin ciniki. -
Tashar Numfashi ta Qinkai Air GI Duct Galvanized Perforated C Channel Slotted Standard HDG Strut Channel don Tsarin HVAC
mm T/pe Rufe saman ƙasa 21×10 An yi masa rami, Mai ƙarfi HDG,PG,PC 21×21 An yi masa rami, Mai ƙarfi HDG,PG,PC 41×21 An yi masa rami, Mai ƙarfi HDG,PG,PC 41×22 An yi masa rami, Mai ƙarfi HDG,PG,PC 41×25 An yi masa rami, Mai ƙarfi HDG,PG,PC 41×41 An yi masa rami, Mai ƙarfi HDG,PG,PC 41×62 An yi masa rami, Mai ƙarfi HDG,PG,PC 41×82 An yi masa rami, Mai ƙarfi HDG,PG,PC -
Tashar tashar galvanization ta Qinkai mai zafi mai inganci
Tashar C, wacce aka fi sani da tashar C ko kuma ƙarfe mai siffar U, wani ƙarfe ne mai siffar ƙarfe mai zafi wanda ke da siffar musamman. Yana da sashe mai faɗi kamar harafin "C" da sassan gefe biyu a tsaye waɗanda ke ba da ƙarin ƙarfi. Tare da ƙirarsa ta musamman, C-beam ɗinmu yana ba da fa'idodi da yawa waɗanda ke sa ya shahara a masana'antar gini.
-
Tashar Hanyar Karfe Mai Rami Mai Rami Ta Qinkai
Guda 10 - 99
$1.50>= guda 100
$1.00Girma
41*21mm
41*41mm
41*62mm
41*82mm
Adadi (guda) 1 – 500 501 – 10000 > 10000 Lokacin gabatarwa (kwanaki) 20 25 Za a yi shawarwari Tashar C ko kuma ƙarfe mai siffar U, wani ɓangare ne na ƙarfe mai siffar sanyi wanda aka yi birgima da shi tare da siffa ta musamman. Yana da sashe mai faɗi kamar harafin "C" da sassan gefe biyu a tsaye waɗanda ke ba da ƙarin ƙarfi. Tare da ƙirarsa ta musamman, C-beam ɗinmu yana ba da fa'idodi da yawa waɗanda ke sa ya shahara a masana'antar gini.
-
Tashar tashar wutar lantarki mai kusurwar C ...
>= guda 100
$1.00Girma
41×4141X21
1-5/8″X1-5/8
41X82
Guage 12
14 guage
1 3/8
Tashar C ko kuma ƙarfe mai siffar U, wani ɓangare ne na ƙarfe mai siffar sanyi wanda aka yi birgima da shi tare da siffa ta musamman. Yana da sashe mai faɗi kamar harafin "C" da sassan gefe biyu a tsaye waɗanda ke ba da ƙarin ƙarfi. Tare da ƙirarsa ta musamman, C-beam ɗinmu yana ba da fa'idodi da yawa waɗanda ke sa ya shahara a masana'antar gini.
-
Tashar C mai zafi da aka tsoma a cikin ruwan zafi ta Qinkai 41*41 mai ramin ƙarfe GI mai hana tsatsa a waje
>= guda 100
$1.00Girma
41*21mm
41*41mm
41*62mm
41*82mm
Tashar C ko kuma ƙarfe mai siffar U, wani ɓangare ne na ƙarfe mai siffar sanyi wanda aka yi birgima da shi tare da siffa ta musamman. Yana da sashe mai faɗi kamar harafin "C" da sassan gefe biyu a tsaye waɗanda ke ba da ƙarin ƙarfi. Tare da ƙirarsa ta musamman, C-beam ɗinmu yana ba da fa'idodi da yawa waɗanda ke sa ya shahara a masana'antar gini.
-
Tashar Karfe ta Qinkai Slotted C tare da Takaddun shaida na CE da ISO
Tashar C ta ƙunshi kayan haɗi na strut masu ƙirƙira waɗanda za a iya amfani da su don ƙirƙirar nau'ikan tsarin tallafi iri-iri don aikace-aikacen injina/lantarki.
Tashar ƙarfe mai rami C tsarin tallafi ne na masana'antu wanda ke ba da ƙarfi, juriya, da sassauci. Ya dace da tsarin bututu, tiren kebul, bututun bututu, akwatunan panel na lantarki, mafaka, grid na likita na sama da ƙari.Sau da yawa ana san wannan samfurin da sunaye da yawa na mallaka kamar "G-STRUT", "Unistrut", "C-Strut", "Hilti Strut", da sauransu, an ƙera shi ne don samar da tallafi mai sauƙi ga tsarin, don ayyuka kamar su wayoyi, kayan aikin injiniya ko na famfo. Abubuwan da aka dakatar daga tashar strut na iya zama daban-daban kamar tsarin sanyaya iska ko tsarin iska, bututu, bututun lantarki, ko duk wani abu da aka sanya a rufin gini. Yawanci ana yin wannan samfurin ne daga takardar ƙarfe, ana naɗe shi a gefunansa don ƙirƙirar siffar tashar da ke riƙe da haɗin haɗi daga rufi ko rufin. Raƙuman da aka riga aka haƙa a cikin tashar suna ba da damar zaɓin inda za a ɗaure shi, kuma haɗinsa yana ɗaukar tsawon tashar da mahaɗan da ke tsaye. Tashar kanta tana ba da damar sanya rataye a ko'ina tare da shi, don haka sake sanya shi yana da sauƙi.
-
Tsarin Hawan Rana na Qintai Pre Galvanized C Channel Tsarin Hawan Rana Tsarin Hawan Rana GI Karfe C Channel Profile na Karfe
Guda 10 - 99
$1.50>= guda 100
$1.00Girma
41*21mm
41*41mm
41*62mm
41*82mm
Adadi (guda) 1 – 500 501 – 10000 > 10000 Lokacin gabatarwa (kwanaki) 20 25 Za a yi shawarwari Tashar C ko kuma ƙarfe mai siffar U, wani ɓangare ne na ƙarfe mai siffar sanyi wanda aka yi birgima da shi tare da siffa ta musamman. Yana da sashe mai faɗi kamar harafin "C" da sassan gefe biyu a tsaye waɗanda ke ba da ƙarin ƙarfi. Tare da ƙirarsa ta musamman, C-beam ɗinmu yana ba da fa'idodi da yawa waɗanda ke sa ya shahara a masana'antar gini.
-
Tashar ƙarfe mai siffar Qinkai 41*21mm da 41*41mm mai siffar ƙarfe mai siffar gi strut channel slotted steel C channel
mm Inci 21×10 13/16 × 13/32" 21×21 13/16 × 13/16" 41×21 1-5/8×13/16" 41×22 1-5/8X7/8" 41×25 1-5/8×1″ 41×41 1-5/8×1-5/8″ 41×62 1-5/8×2-7/16″ 41×82 1-5/8X3-1/4" -
Qinkai Bakin Karfe Aluminum Karfe Frp Slotted Strut Channal Tare da CE da ISO Certificate
Tashar Strut tana ba da tsari mai kyau ga duk tsarin tallafi. An shigar da ita cikin sauƙi, tana ba da cikakkiyar sassauci don ƙara hanyar sadarwa ta aikace-aikacen tallafi, ba tare da buƙatar walda ba. Ana amfani da tashar da aka bayar sosai don tsarin tiren kebul, tsarin wayoyi, tsarin ƙarfe, bututun lantarki mai tallafawa shiryayye da bututu kuma ana buƙatar ta sosai a masana'antu ko kamfanoni da yawa. Ana ƙera wannan tashar ta amfani da fasahohin zamani da kayan aiki masu kyau. Baya ga wannan, masu biyan kuɗinmu masu daraja za su iya amfani da waɗannan Tashar Unistrut akan farashi mai araha a cikin lokacin da aka keɓe. Babban fa'idar tashoshin strut a cikin gini shine akwai zaɓuɓɓuka da yawa don haɗa tsayi tare da sauran abubuwa cikin sauri da sauƙi zuwa tashar strut, ta amfani da maƙallan musamman da ƙusoshi na musamman.
-
Maƙallan ƙarfe na Qinkai Pre galvanized uni strut, bakin ƙarfe c channelc channelc channel 4121 gi slotted channel
Inci Kauri 13/16 × 13/32" 0.8.1.0, 1.2,1.5,1.82.0,2.3,2.5 13/16 × 13/16" 0.8.1.0, 1.2,1.5,1.82.0,2.3,2.5 1-5/8×13/16" 0.8.1.0, 1.2,1.5,1.82.0,2.3,2.5 1-5/8X7/8" 0.8.1.0, 1.2,1.5,1.82.0,2.3,2.5 1-5/8×1″ 0.8.1.0, 1.2,1.5,1.82.0,2.3,2.5 1-5/8×1-5/8″ 0.8.1.0, 1.2,1.5,1.82.0,2.3,2.5 1-5/8×2-7/16″ 0.8.1.0, 1.2,1.5,1.82.0,2.3,2.5 1-5/8X3-1/4" 0.8.1.0, 1.2,1.5,1.82.0,2.3,2.5 -
Kamfanin Qintai strut c na duniya baki ɗaya yana ba da sabis na strut
Tashar strut tana ba da tsari mai kyau ga duk tsarin tallafi. Yana da sauƙin shigarwa kuma yana iya ƙara hanyar sadarwa ta aikace-aikacen tallafi cikin sassauƙa ba tare da wani walda ba. Ana amfani da tashoshin da aka bayar sosai a cikin tsarin tiren kebul, tsarin kebul, tsarin ƙarfe, hanyoyin tallafi na waya da bututu, kuma suna da babban buƙata a masana'antu ko kamfanoni da yawa. An ƙera tashar ta amfani da fasaha mai ƙirƙira da kayan aiki masu inganci. Bugu da ƙari, abokan cinikinmu masu daraja za su iya amfani da tashar strut akan farashi mai ma'ana a cikin lokacin da aka yi alkawari. Babban fa'idar tashar strut a cikin gini shine akwai zaɓuɓɓuka da yawa don haɗa tsayin da sauran abubuwa zuwa tashar strut cikin sauri da sauƙi ta amfani da maƙallan musamman da kusoshi daban-daban don tashar strut.
