Tsarin Tsarin C Channel
-
Tashar ƙarfe mai siffar Qinkai 41*21mm da 41*41mm mai siffar ƙarfe mai siffar gi strut channel slotted steel C channel
mm Inci 21×10 13/16 × 13/32" 21×21 13/16 × 13/16" 41×21 1-5/8×13/16" 41×22 1-5/8X7/8" 41×25 1-5/8×1″ 41×41 1-5/8×1-5/8″ 41×62 1-5/8×2-7/16″ 41×82 1-5/8X3-1/4" -
Tashar Numfashi ta Qinkai Air GI Duct Galvanized Perforated C Channel Slotted Standard HDG Strut Channel don Tsarin HVAC
mm T/pe Rufe saman ƙasa 21×10 An yi masa rami, Mai ƙarfi HDG,PG,PC 21×21 An yi masa rami, Mai ƙarfi HDG,PG,PC 41×21 An yi masa rami, Mai ƙarfi HDG,PG,PC 41×22 An yi masa rami, Mai ƙarfi HDG,PG,PC 41×25 An yi masa rami, Mai ƙarfi HDG,PG,PC 41×41 An yi masa rami, Mai ƙarfi HDG,PG,PC 41×62 An yi masa rami, Mai ƙarfi HDG,PG,PC 41×82 An yi masa rami, Mai ƙarfi HDG,PG,PC -
Maƙallan ƙarfe na Qinkai Pre galvanized uni strut, bakin ƙarfe c channelc channelc channel 4121 gi slotted channel
Inci Kauri 13/16 × 13/32" 0.8.1.0, 1.2,1.5,1.82.0,2.3,2.5 13/16 × 13/16" 0.8.1.0, 1.2,1.5,1.82.0,2.3,2.5 1-5/8×13/16" 0.8.1.0, 1.2,1.5,1.82.0,2.3,2.5 1-5/8X7/8" 0.8.1.0, 1.2,1.5,1.82.0,2.3,2.5 1-5/8×1″ 0.8.1.0, 1.2,1.5,1.82.0,2.3,2.5 1-5/8×1-5/8″ 0.8.1.0, 1.2,1.5,1.82.0,2.3,2.5 1-5/8×2-7/16″ 0.8.1.0, 1.2,1.5,1.82.0,2.3,2.5 1-5/8X3-1/4" 0.8.1.0, 1.2,1.5,1.82.0,2.3,2.5 -
Tashar Hanyar Karfe Mai Rami Mai Rami Ta Qinkai
Guda 10 - 99
$1.50>= guda 100
$1.00Girma
41*21mm
41*41mm
41*62mm
41*82mm
Adadi (guda) 1 – 500 501 – 10000 > 10000 Lokacin gabatarwa (kwanaki) 20 25 Za a yi shawarwari Tashar C ko kuma ƙarfe mai siffar U, wani ɓangare ne na ƙarfe mai siffar sanyi wanda aka yi birgima da shi tare da siffa ta musamman. Yana da sashe mai faɗi kamar harafin "C" da sassan gefe biyu a tsaye waɗanda ke ba da ƙarin ƙarfi. Tare da ƙirarsa ta musamman, C-beam ɗinmu yana ba da fa'idodi da yawa waɗanda ke sa ya shahara a masana'antar gini.
-
Tashar Gi C mai slotted mai zafi ta Qinkai
Inci Ma'auni 13/16 × 13/32" 19, 16, 14, 12 13/16 × 13/16" 19, 16, 14, 12 1-5/8×13/16" 19, 16, 14, 12 1-5/8X7/8" 19, 16, 14, 12 1-5/8×1″ 19, 16, 14, 12 1-5/8×1-5/8″ 19, 16, 14, 12 1-5/8×2-7/16″ 19, 16, 14, 12 1-5/8X3-1/4" 19, 16, 14, 12 -
Tashar C mai zafi da aka tsoma a cikin ruwan zafi ta Qinkai 41*41 mai ramin ƙarfe GI mai hana tsatsa a waje
>= guda 100
$1.00Girma
41*21mm
41*41mm
41*62mm
41*82mm
Tashar C ko kuma ƙarfe mai siffar U, wani ɓangare ne na ƙarfe mai siffar sanyi wanda aka yi birgima da shi tare da siffa ta musamman. Yana da sashe mai faɗi kamar harafin "C" da sassan gefe biyu a tsaye waɗanda ke ba da ƙarin ƙarfi. Tare da ƙirarsa ta musamman, C-beam ɗinmu yana ba da fa'idodi da yawa waɗanda ke sa ya shahara a masana'antar gini.
-
Maƙallin daidaita yanayin girgizar ƙasa na Qinkai GI bayanin martabar C Tashar ƙarfe Tashar C mai galvanized ta farko don Tsarin Haɗa Rana
mm T/pe Rufe saman ƙasa 21×10 An yi masa rami, Mai ƙarfi HDG,PG,PC 21×21 An yi masa rami, Mai ƙarfi HDG,PG,PC 41×21 An yi masa rami, Mai ƙarfi HDG,PG,PC 41×22 An yi masa rami, Mai ƙarfi HDG,PG,PC 41×25 An yi masa rami, Mai ƙarfi HDG,PG,PC 41×41 An yi masa rami, Mai ƙarfi HDG,PG,PC 41×62 An yi masa rami, Mai ƙarfi HDG,PG,PC 41×82 An yi masa rami, Mai ƙarfi HDG,PG,PC -
Tashar Karfe/Sashe ta Qinkai Karfe Bakin Karfe Aluminum Frp Solid Strut Channel/Sashe Karfe
41x41mm, 41x21mm, ko 41x62mm Karfe, Aluminum, ko FRP Plain Channel/Strut tsawon mita 6; An adana shi a cikin nau'ikan bayanin martaba na yau da kullun ko na ribbons.
Cikakkun Bayanan Fasaha
Ƙimar nauyin da aka nuna sun yi daidai da AS/NZS4600:1996, ta amfani da ƙaramin matsin lamba na FY na 210 MPa akan tashar/strut mai sauƙi.
Sakamakon da aka buga an dogara ne akan tsawon da aka ɗauka daidai gwargwado, wanda kawai aka tallafa.
An ƙididdige karkacewa ta amfani da dabarun da aka saba amfani da su a matsakaicin matsin lamba da aka yarda.
-
Tashar strut ta musamman mai siffar C Tashar c mai siffar 41 x 21 Tashar Karfe
Tashar Sashen Karfe C (Maƙallin Unistrut)
1) Daidaitacce: 41*41, 41*21, da sauransu
2) baya zuwa baya: 41×41,41×62,41×82..
3) kauri: 1.0mm ~ 3.0mm.
4) Tsawon: bisa ga buƙatar abokin ciniki.
5) Ana samun BH4141 (BH4125) a cikin bakin karfe ko wani kauri akan oda ta musamman.6) Akwai nau'ikan girman ramin da aka slotted da yawa.
Aikin Tashar Sashe na C:
> yana da sauƙin gini kuma yana adana lokaci da aiki mai yawa.
> mai sauƙi kuma mai arha.
> ƙarfin injina mai girma.
> nau'ikan kayan haɗi daban-daban na iya ƙunsar haɗuwa da yawa kuma ana sayarwa.
> mai kyau a cikin kamanni.
-
Tashar Tashar Karfe Mai Sauƙi ta Qinkai Mai Sauƙi
Cikakkun Bayanan Fasaha
Ƙimar nauyin da aka nuna sun yi daidai da AS/NZS4600:1996, ta amfani da ƙaramin matsin lamba na FY na 210 MPa akan tashar/strut mai sauƙi.
Sakamakon da aka buga an dogara ne akan tsawon da aka ɗauka daidai gwargwado, wanda kawai aka tallafa.
An ƙididdige karkacewa ta amfani da dabarun da aka saba amfani da su a matsakaicin matsin lamba da aka yarda.
Waɗannan hanyoyin strut suna da ganuwar da ta yi ƙarfi, don haka sun dace da sassan da ba sa buƙatar kayan haɗi ko kayan haɗi. Hakanan suna ba da kyawun yanayi fiye da hanyoyin strut masu slot. Waɗannan hanyoyin strut suna tallafawa wayoyi, famfo, da kayan aikin injiniya a aikace-aikacen lantarki da gini.
