Cable tray capabilities

Ubungakanani betreyi ye-CABLE MESH

I-QIKAI Cable Mesh yimveliso yenkxaso yekhebula esebenza kakuhle, elula ukuyifaka kwaye inemisebenzi emininzi enokuxhasa uthotho lweentambo kwizicelo ezahlukeneyo...

I-Cable net yimveliso yenkxaso yentambo yohlobo lwebhasikithi yesinyithi eyenzelwe ukufakwa kwiindawo ezahlukeneyo kwaye isebenze kuyo nayiphi na imiqobo kwindawo yeprojekthi ngokweemfuno zabasebenzi bokufakela.

I-cable mesh kaQinkai inika izixhobo ezahlukeneyo, kuquka i-pre-galvanized, i-hot-dip galvanized, i-galvanized kunye ne-stainless steel. Ubunzulu obuqhelekileyo bokubekwa kwe-cable yeQinkai yi-50 mm, kwaye ububanzi buyahluka ukusuka kwi-50 ukuya kwi-900 mm.

Inethi yentambo enobunzulu bokubekwa kwentambo eyi-100mm kunye nokuphakama kodonga olusecaleni okukhulu (ngokweemfuno zeodolo) nayo ingabonelelwa.

Ukufakelwa kweMesh yinkqubo elula kakhulu: imveliso ixhotyiswe nge-cantilever yayo kunye nenkxaso ye-trapezoidal, kodwa ingasetyenziswa kunye ne-strut yendabuko ebanzi engama-41mm, enokunqunyulwa kwaye igotywe ukuze yenze umbhobho (ukugoba okuthe nkqo), ukugoba okuthe tye, kwaye inokwenziwa ibe ziikhonkco ezimile okwe-T okanye ezimile okwe-cross ezinezihlanganisi ze-bolt ezidityaniswe lula. Ukusebenzisa izihlanganisi ezisecaleni nasezantsi zemveliso ngokwayo, kulula ukudibanisa ubude kunye, nto leyo enceda ukufezekisa uqhagamshelo oluqinileyo nolukhuselekileyo.

I-Cable Mesh idla ngokusetyenziswa njengenkqubo yokulawula inani elikhulu leentambo zedatha kwiindawo ezintsonkothileyo nezikumgangatho ophezulu (ezifana namagumbi eseva okanye iiswitshi zefowuni). I-Qinkai's Drop-Out sisixhobo esikrelekrele esivumela umfaki ukuba asuse intambo kwi-Mesh nge-radius egudileyo kwaye athintele ukugoba okanye ukugoba okungafunekiyo, okunokonakalisa kwaye kuthintele ukusebenza kweentlobo zeentambo ezinobuthathaka (ezifana nenethiwekhi okanye i-optical fiber).

Umthwalo olinganisiweyo wenethiwekhi yekhebula ye-QIKAIT ngumthwalo ophezulu ovumelekileyo ngemitha nganye kwisithuba esithile. Iinkcukacha ziyafumaneka kwiphepha lemveliso, kodwa ungafunda ngakumbi ngalo mba apha.

IDATHA YOKUFAKWA KWE-CABLE MESH

Ukuze ufumane ulwazi oluthe kratya malunga nokufaka, ukusika okanye ukudibanisa ubude beQinkai, siqokelele izikhokelo eziluncedo ezivela kumasebe, ezinokufumaneka nakwikhathalogu yethu. Ukuze ufumane uthelekiso oluneenkcukacha ngakumbi phakathi kwenethiwekhi yekhebula kunye nenkqubo yetreyi yekhebula, nceda ujonge intshayelelo yetreyi yekhebula apha.

ITHEYI YECABLE YOHLOBO LWEZILERI ZE-QINKAI T3

Inkqubo yeT3 Ladder Tray yenzelwe ulawulo lweentambo ezixhaswa yitrapeze okanye ezifakwe kumphezulu kwaye ifanelekile kwiintambo ezincinci, eziphakathi nezinkulu ezifana neTPS, i-data comms, iiMains kunye nee-sub mains.

I-T3 inikezela ngokudibanisa okupheleleyo, isindisa umfaki ekubeni athwale uluhlu lwezixhobo ezimbini.

Idatha yomthwalo kunye nokuphambuka ithathwe kwiimvavanyo ezenziwe kwindawo yovavanyo eqinisekisiweyo yi-NATA ngokwe-NEMA VE1-2009STANDARDS.

ZONKE iileri zidlula udidi olusetyenzisiweyo kwimveliso.

Idatha yomthwalo isekelwe kwiispani ezi-single nto leyo ebangela imeko embi kakhulu ye-scenaril. Ukuphambuka okudweliswe kwitheyibhile yethu kusekelwe kwiispani eziqhubekayo, ukufakwa kwespani esinye kuya kubangela ukuphambuka okwandileyo, kwiispani ezi-single phinda ukuphambuka okuhambelanayo nge-2.5 Ukuze ufumane ulwazi oluthe vetshe malunga ne-Nema VE 1-2009 Standards Safety Factor 1.5 phezu komthwalo wokuwa.

Ikhowudi yoku-odola	Ububanzi bokubekwa kweCable W (mm)	Ubunzulu bokubekwa kweCable (mm)	Ububanzi obupheleleyo (mm)	Ukuphakama kodonga olusecaleni (mm)
T3150	150	43	168	50
T3300	300	43	318	50
T3450	450	43	468	50
T3600	600	43	618	50

UMBALA WOKUSETYENZISWA KWEBHULORHO YETROUGH NE-LADDER BRIDGE

IBHULORHO YASETROUGH

Itreyi yekhebula yohlobo lwe-trough luhlobo lwetreyi yekhebula evalekileyo ngokupheleleyo eyohlobo oluvalekileyo.

Ibhulorho yokuhambisa amanzi ifanelekile ukubeka iintambo zekhompyutha, iintambo zonxibelelwano, iintambo ze-thermocouple kunye nezinye iintambo zokulawula zeenkqubo ezinobuthathaka kakhulu.

Ibhulorho yomkhombe inefuthe elihle ekuphazamisekeni kwentambo yokulawula kunye nokukhuselwa kwentambo kwindawo enokutsha kakhulu.

Ibhulorho enezikhewu ngokubanzi ayinazo iindawo ezivulekileyo, ngoko ke ayisasazeki kakuhle kubushushu, ngelixa ezantsi kwesithuba sebhulorho yeleli inemingxuma emininzi efana nesinqe, kwaye ukusebenza kobushushu kubhetele.

Okwesibini, IBHULORHO YEZILEYI

Ibhulorho yohlobo lweleli luhlobo olutsha oluphuculwe yinkampani ngokusekelwe kwizixhobo ezifanelekileyo zasekhaya nezangaphandle kunye neemveliso ezifanayo. Ibhulorho yohlobo lweleli ineenzuzo zobunzima obulula, ixabiso eliphantsi, imo eyahlukileyo, ukufakwa okulula, ukusasaza ubushushu kakuhle kunye nokungena komoya okuhle.

Ibhulorho yohlobo lweleli ifanelekile ekufakweni kweentambo ezinobubanzi obukhulu ngokubanzi, ingakumbi ekufakweni kweentambo zamandla eziphezulu neziphantsi.

Ibhulorho efana neleli ixhotyiswe ngesigqubuthelo sokukhusela, esinokuchazwa xa kuodolwa xa kufuneka isigqubuthelo sokukhusela.

Kwindawo yokwakha ngokubanzi nangokutsho kwemizobo yoyilo, ibhulorho efana neleli isetyenziselwa ngokukodwa ukubeka iintambo ezinkulu, kwaye ibhulorho efana nelindle nayo yeyona modeli isetyenziswa kakhulu.° Ibhulorho evalwe ngokupheleleyo inomsebenzi ophambili wokukhusela ukuphazamiseka kunye nokumelana nokugqwala.

Imilo yebhulorho enezitebhisi ifana neleli (H). Umzantsi weleli ufana nezitebhisi, kwaye kukho amaqhina ecaleni. Indawo enothuli isebenzisa ileli, engayi kuqokelela uthuli.

ILERI YECABLE

I-Qinkai Cable Ladder yinkqubo yolawulo lweengcingo engabizi kakhulu eyenzelwe ukuxhasa nokukhusela iingcingo kunye neengcingo. Iileri zentambo zingasetyenziselwa iintlobo ngeentlobo zezicelo zangaphakathi nangaphandle.

Iitreyi zekhebula zohlobo lweleli zenzelwe ukuthwala imithwalo enzima yeentambo kuneetreyi zekhebula ezineembobo eziqhelekileyo. Eli qela lemveliso kulula ukulisebenzisa ngokuthe nkqo. Kwelinye icala, uhlobo lweleli yekhebula lubonelela ngendalo.

Ukugqitywa okuqhelekileyo kweleli yekhebula leQinkai kulandelayo, okunokwenziwa ngokwezifiso ngokobubanzi obahlukeneyo kunye nobunzulu bomthwalo. Ifanelekile kwiindlela ezahlukeneyo zokusebenza, kubandakanya umnyango wenkonzo ephambili, i-power feeder ephambili, umgca wesebe, isixhobo kunye nentambo yonxibelelwano. Idibanisa ubulukhuni kunye neeleli, kodwa inika inkxaso eyongezelelweyo ukuqinisekisa ukuba iintambo ziqinile kwaye ziyafana Ukuthintela uthuli, amanzi okanye inkunkuma ewayo Umoya owaneleyo ukuqinisekisa ukuba ubushushu obuveliswa kumqhubi wekhebula buchithwa ngokufanelekileyo ngaphandle kokuqokelelana komswakama Ukufikelela lula kwiintambo ukusuka phezulu okanye ezantsi Ukhuseleko oluphezulu ngokuchasene nokuphazamiseka kwe-electromagnetic okanye i-radio frequency Khusela kwaye ukhusele iisekethe ezinovakalelo

Ipharamitha yeleli yekhebula le-QINKAI

Inombolo yoMzekelo	Ileli yekhebula leQinkai	Ububanzi	50mm-1200mm
Ukuphakama kweSitimela esisecaleni	25mm -300mm okanye ngokweemfuno	Ubude	1m-6m okanye ngokweemfuno
Ubukhulu	0.8mm-3mm Ngokweemfuno	Izixhobo	Intsimbi yeCarbon, iAluminiyam, iNtsimbi engenasici, iglasi yeFayibha
Umphezulu ugqityiwe	I-Pre-Gal, i-Electro-Gal, i-HDG, i-Power Coated, ipeyinti, i-matt, i-anodizing, i-satt, i-polished okanye enye indawo oyifunayo	Umthwalo oSebenzayo kakhulu	100-800kgs, Ngokwesayizi
I-MOQ	yobungakanani obuqhelekileyo, iyafumanekaUbungakanani Bawo Wonke	Amandla okubonelela	Iimitha ezingama-250 000 ngenyanga
Ixesha lokukhokhela	Iintsuku ezili-10-60 ngokobungakanani	Inkcazo	ngokweemfuno zakho
Isampulu	iyabhabha	Iphakheji yoThutho	ubukhulu, ibhokisi, ipalethi, iibhokisi zomthi, Ngokweemfuno

ITHEYI YECABLE YE-WIRE MESH

I-T3 inikezela ngokudibanisa okupheleleyo, isindisa umfaki ekubeni athwale uluhlu lwezixhobo ezimbini.

Idatha yomthwalo kunye nokuphambuka ithathwe kwiimvavanyo ezenziwe kwindawo yovavanyo eqinisekisiweyo yi-NATA ngokwe-NEMA VE1-2009STANDARDS.

ZONKE iileri zidlula udidi olusetyenzisiweyo kwimveliso.

Iibhrakhethi zeCantilever

I-cantilever ende eyi-150mm ukuya kwi-900mm isebenzisa itshaneli/i-strut ye-QK1000 41x41mm.

Iibrakethi zeCantilever zenziwe ukuze zihambelane noluhlu lweenkqubo zokuxhasa iintambo.

Ifakwe i-galvanish ngokupheleleyo emva kokwenziwa kwayo ukuze inike ukhuseleko olunzima kwiimeko ezininzi.

Ingenziwa ngentsimbi engagqwaliyo yebanga lama-316 ukuze isetyenziswe kwiindawo ezinobungozi kakhulu.

Izibiyeli ze-fiberglass ziyafumaneka xa ziceliwe.

Iingenelo zeQinkai Channel Cantilever Bracket

1. Ukwenza ulwakhiwo lube lula kwaye lube lula ngakumbi, ukonga ixesha kunye neendleko zabasebenzi

2. Senza i-OEM kuzo zonke iintlobo zeebrakethi zentsimbi ngokoyilo lwee-clinet.

3. Iindidi ezahlukeneyo zezinto zokufakelwa zinokuseka imixube eyahlukeneyo

4. Umthamo omkhulu wokulayisha

5, Iibrakethi zenziwe ngentsimbi ye-Q235 ene-galvanized finish okanye i-epoxy coating. Ubukhulu bodonga yi-2.5mm. Ubukhulu bodonga bungaba yi-2.0mm kunye ne-1.5mm kwinkqubo yokuxhoma ukukhanya, kumthamo womthwalo we-beam, sebenzisa i-80% kunye ne-60% yetshathi yomthwalo efanelekileyo ngokwahlukeneyo.

6, Imingxunya okanye iindawo zokubeka ziyafumaneka kwipleyiti yesiseko xa kufunwa.

Nge	Ubude	Ubude	Ubukhulu
27mm	18mm	200mm-600mm	1.25mm
28mm	30mm	200mm-900mm	1.75mm
38mm	40mm	200mm-950mm	2.0 mm
41mm	41mm	300mm-750mm	2.5 mm
41mm	62mm	500mm-900mm	2.5 mm

Itshaneli enemiqolo ene-ribbed slots ene-aluminium alloy yentsimbi engagqwaliyo

Iitshaneli ze-C zisetyenziselwa kakhulu ukufaka, ukuxhasa, ukuxhasa kunye nokudibanisa imithwalo yesakhiwo esikhaphukhaphu kwizakhiwo. Ezi ziquka imibhobho, iingcingo zombane nezedatha, iinkqubo zoomatshini ezifana nokungenisa umoya kunye ne-air conditioning, inkqubo yokufakela iiphaneli zelanga.

Ikwasetyenziswa nakwezinye iinkqubo ezifuna isakhelo esomeleleyo, ezinje ngeerakhi zezixhobo, iibhentshi zokusebenzela, iinkqubo zeeshelufu njl.njl.

Itshaneli ye-Strut inika inkxaso elula yesakhiwo socingo, imibhobho, okanye izinto zoomatshini. Inemilebe ejonge ngaphakathi yokufaka amantongomane, ii-braces, okanye ii-engile zokudibanisa ukudibanisa ubude beetshaneli ze-strut kunye. Ikwasetyenziselwa ukudibanisa iipayipi, ucingo, iintonga ezinemisonto, okanye iibholithi eludongeni. Uninzi lwetshaneli ye-strut luneendawo ezisezantsi ukuze kube lula ukunxibelelana okanye ukubopha itshaneli ye-strut kwizakhiwo zokwakha. Itshaneli ye-Strut kulula ukuyidibanisa nokuyitshintsha, kwaye iintlobo ezahlukeneyo zetshaneli zinokuxutywa kwaye zihambelane. Isetyenziswa rhoqo kumashishini ombane nawokwakha. Itshaneli ye-Strut ingasetyenziselwa ukwenza isakhiwo esisisigxina esixhasa iingcingo ezijikeleze ipropathi, okanye inokugcina okwethutyana iintlobo ezahlukeneyo zoomatshini kunye neengcingo kwiiprojekthi zexesha elifutshane.

Igama lemveliso	Itshaneli yeStrut efakwe kwiSlotted (C Channel, Slotted Channel)
Izinto eziphathekayo	Q195/Q235/SS304/SS316/Aluminiyam
Ubukhulu	1.0mm/1.2mm/1.5mm/1.9mm/2.0mm/2.5mm/2.7mm12GA/14GA/16GA/0.079''/0.098''
Indawo yokudlula	4121,/4141 /4162/4182mm enesithuba okanye engenanto 1-5/8'' x 1-5/8'' 1-5/8'' x 13/16''
Ubude	3m/6m/eyenzelwe wena 10ft/19ft/eyenzelwe wena