Qinkai T3 Cable Tray Fittings

Short Description:

T3 is formed from 1 piece of material, and can support greater loads than other trays with similar cabling depths because of the strong metal used to make it, and its unique structural design engineered to enhance its strength for both short and long spans.

Furthermore, its smooth appearance and high quality control throughout the manufacturing process makes it an attractive choice for inside installations, but as it is strong and durable, it remains a good option for industrial or other demanding sites as well.

Send email to us Download catalog page

Product Detail

Product Tags

Hold down clip and splice plate of t3 cable tray

The hold-down device is used to fix the T3 cable tray to a certain length of strut/channel. Always use in pairs on opposite sides of the tray and fix T3 at least twice along its length.
T3 splices are used to join 2 lengths of tray together, and are installed on the inside of the trays' side wall.
T3 fittings are applicable to all tray widths and can be used to make tee, riser, elbow and cross.

Radius bend for t3 cable tray elbow

Use the radius plate to create a bend in your length of T3 cable tray

you just need use radius plate to make a suitable elbow for your cable tray

Use the radius plate to create a elbow bend in your length of T3 cable tray

Nominal length 2.0 metres.Approximate length required to make a 150 radius bend

Tray Size	Length Req'd (m)	Fasteners Req'd
T3150	0.7	6
T3300	0.9	6
T3450	1.2	8
T3600	1.4	8

Cross bracket for t3 cable tray tee or cross

The TX tee/cross bracket is used to create a tee or cross connection between the lengths of the T3 cable tray.
A full range of T3 accessories can be provided to supplement the system and facilitate on-site manufacturing.
T3 fittings are applicable to all tray widths and can be used to make tee, riser, elbow and cross.

T3 is formed from 1 piece of material, and can support greater loads than other trays with similar cabling depths because of the strong metal used to make it, and its unique structural design engineered to enhance its strength for both short and long spans. Furthermore, its smooth appearance and high quality control throughout the manufacturing process makes it an attractive choice for inside installations, but as it is strong and durable, it remains a good option for industrial or other demanding sites as well.

Riser links for cable tray riser

Riser connections are used to create risers or vertical bends in cable trays of length T3.
A full range of T3 accessories can be provided to supplement the system and facilitate on-site manufacturing.
T3 fittings are applicable to all tray widths and can be used to make tee, riser, elbow and cross.

6 Riser Links required to perform a 90 degree set.

Riser connections are used to create risers or vertical bends in cable trays of length T3.
A full range of T3 accessories can be provided to supplement the system and facilitate on-site manufacturing.
T3 fittings are applicable to all tray widths and can be used to make tee, riser, elbow and cross.

Cable cover for t3 cable tray

Covers are offered in flat, peaked, and vented styles

Ordering Code	Nominal Width (mm)	Overall Width (mm)	Length (mm)
T1503G	150	174	3000
T3003G	300	324	3000
T4503G	450	474	3000
T6003G	600	624	3000

Covers for components of the cable tray range are offered in flat, peaked, or peaked and vented styles and suit most standard widths.

Splice bolts for cable tray connector

Splice Bolts have a smooth head to eliminate the risk of sheathing the cable during installation.

Purpose made Counterbore Nuts ensure that full tension is achieved during installation.

Parameter

Qinkai ET3 cable tray parameter

Ordering Code	Cable Laying Width W (mm)	Cable Laying Depth (mm)	Overall Width (mm)	Side Wall Height (mm)
T3150	150	43	168	50
T3300	300	43	318	50
T3450	450	43	468	50
T3600	600	43	618	50