• Phone: 8613774332258
  • Qinkai Steel Stainless Steel Aluminum Frp Solid Strut Channel/Section Steel

    Short Description:

    41x41mm, 41x21mm, or 41x62mm Steel, Aluminium, or FRP Plain Channel/Strut in 6m lengths; Stocked in standard or ribbed profile versions

    Technical Details

    The load values shown are in accordance with AS/NZS4600:1996, using a minimum yield stress for Fy of 210 MPa on plain channel/strut.

    The published results are based on a uniformly loaded, simply supported span.

    Deflection has been calculated using standard formulae at the maximum permissible stress.


    Product Detail

    Product Tags

    41x21MM Solid Channel Strut

    41x21x2.5mm Load Rating & Deflection

    Span (mm) Max. Allowable Load (kg) Deflection at Allowable load (kg)
    250 442 0.29
    500 221 1.17
    750 147 2.64
    1000 110 4.69
    1250 89 7.34
    1500 73 10.57
    1750 63 14.39
    2000 55 18.79
    2250 49 23.78
    2500 44 29.35
    2750 40 35.52
    3000 37 42.27
    Strut channel is used to mount, brace, support, and connect lightweight structural loads in building construction. These include cabling systems, wiring system, cable tray system, cable trunking system, conduit systems, pipes, electrical and data wire, mechanical systems such as ventilation, air conditioning, and other mechanical systems

    41x21MM Solid Ribbed Channel Strut

    The strut channel materials with mill steel, pre-galvanized steel, hot dip galvanized steel, 304/316 stainless steel. The channel steel used in Solar power system,steel structure,cable tray management system solution,cabling management service solution , telecommunication trunking systems and so on.

    41x21x1.6mm Load Rating & Deflection

    Span (mm) Max. Allowable Load (kg) Deflection at Allowable Load (mm)
    250 350 0.31
    500 175 1.22
    750 116 2.76
    1000 88 4.89
    1250 70 7.65
    1500 58 11.02
    1750 50 15.00
    2000 44 19.59
    2250 39 24.82
    2500 35 30.61
    2750 32 37.04
    3000 30 44.15

    41x41MM Solid Channel Strut

    41x41x2.5mm Load Rating & Deflection

    Span (mm) Max. Allowable Load (kg) Deflection at Allowable Load (mm)
    250 1308 0.17
    500 654 0.68
    750 436 1.53
    1000 328 2.72
    1250 261 4.25
    1500 218 6.13
    1750 187 8.34
    2000 163 10.90
    2250 145 13.80
    2500 131 17.03
    2750 119 20.61
    3000 109 24.56
    Solid strut channel mainly for framing and mounting electrical wires and cables,

    41x21MM Solid Ribbed Channel Strut

    Strut channel is used to mount, brace, support, and connect lightweight structural loads in building construction. These include cabling systems, wiring system, cable tray system, cable trunking system, conduit systems, pipes, electrical and data wire, mechanical systems such as ventilation, air conditioning, and other mechanical systems

    41x41x1.6mm Load Rating & Deflection

    Span (mm) Max. Allowable Load (kg) Deflection at Allowable Load (mm)
    250 945 0.16
    500 471 0.65
    750 314 1.46
    1000 236 2.59
    1250 189 4.05
    1500 157 5.84
    1750 135 7.94
    2000 117 10.37
    2250 105 13.80
    2500 94 16.20
    2750 85 19.62
    3000 78 23.34

    41x61MM Solid Channel Strut

    41x61x2.5mm Load Rating & Deflection

    Span (mm) Max. Allowable Load (kg) Deflection at Allowable Load (mm)
    250 2488 0.11
    500 1244 0.45
    750 830 1.02
    1000 622 1.81
    1250 498 2.82
    1500 414 4.06
    1750 355 5.54
    2000 311 7.23
    2250 276 9.16
    2500 249 11.30
    2750 226 13.68
    3000 207 16.28
    Strut channel is used to mount, brace, support, and connect lightweight structural loads in building construction. These include cabling systems, wiring system, cable tray system, cable trunking system, conduit systems, pipes, electrical and data wire, mechanical systems such as ventilation, air conditioning, and other mechanical systems
    Back-to-back Steel Strut Channels are spot welded on approx. 3” centres
Standard lengths are 10 feet (-120) and 20 feet (-240)
Back-to-back strut can be cut to custom lengths at the factory
Add finish and length in inches to Channel Prefix above for Catalogue No. (S2BB-G-120)
    Channel edges and nut’s tapered grooves act as guides to provide positive alignment of connection.
Nut teeth grip the channel’s inturned edges, tying the channel sides together in a “box” configuration for added strength.
Longitudinal movement of nut is resisted as hardened teeth bite into the inturned edges.
    Each channel incorporates a continuous slot along the full length and inturned edges that allow infinite design possibilities and cost effective installations. Standard lengths are 10 feet (-120) and 20 feet (-240).
    All single Unistrut Channel members are accurately and carefully
rolled from strip steel to AS1594 and AS1365. Spot-welded combination
members are welded 75mm (maximum) on centre. Some
members may require fillet welding.

    Parameter

    Qinkai Single Plain Steel Solid Strut Channel/Section Steel parameter

    Single Plain Steel Solid Strut Channel/Section Steel

    CAT#

    SIZE

    (mm)

    THICKNESS

    (mm)

    QK3300

    41*21

    0.9-2.7

    QK1000

    41*41

    0.9-2.7

    QK5500

    41*62

    0.9-2.7

    QK6500

    41*82

    0.9-2.7

    Standard Channel lengths are 3 mtrs or 6 mtrs. Cut to channel lengths can be supplied on request.
    And specification can be customized

    Qinkai Back-to-back Plain Steel Solid Strut Channel/Section Steel Parameter

    Back-to-back Plain Steel Solid Strut Channel/Section Steel

    (Double Plain Steel Solid Strut Channel/Section Steel)

    CAT#

    SIZE

    (mm)

    THICKNESS

    (mm)

    QK3301

    41*21

    0.9-2.7

    QK1001

    41*41

    0.9-2.7

    Standard Channel lengths are 3 mtrs or 6 mtrs. Cut to channel lengths can be supplied on request.

    And specification can be customized

    If you need know more about Qinkai Plain Steel Solid Strut Channel/Section Steel. Welcome to visit our factory or send us enquiry.

    Qinkai Plain Steel Solid Strut Channel/Section Steel Inspection

    plain steel inspection

    Qinkai Plain Steel Solid Strut Channel/Section Steel Package

    plain steel package

    Qinkai Plain Steel Solid Strut Channel/Section Steel Process Flow

    plain steel process

  • Previous:
  • Next: