Qinkai Cable Basket Tray Fittings

Short Description:

Installation Notice:

Bends, Risers, T Junctions, Crosses and Reducers can be made from wire mesh cable tray (ISO.CE) straight sections flexibly in project site.

wire mesh cable tray (ISO.CE) should be supported at a normally span 1.5m by trapeze, wall, floor or channel mounting methods (Maxium span is 2.5m).

wire mesh cable tray (ISO.CE) can be safely applied in places where the temperature ranges between -40°C and +150°C without any change to their characteristics

Send email to us Download catalog page

Product Detail

Product Tags

Wire Mesh Cable Tray Cabinet Top Stand Stand-Off Brackets

Apply to: Floor or cabinet top, the height can be adjustable

Fit for: Wire mesh cable tray from 100 mm to 600 mm , the height of bracket is 120 mm or customized.

Include: Bar x l, Foot x 2 , a set of bolt and nut

Feature: Neat and easy, good bearing

Wire Mesh Cable Tray Offline Plate Cable Drop Out

Apply to: Output cables from trays. Smoothly drop cables out of mesh

Fit for: Diameter from 3.5mm to 6.0mm ,Width of trays >150mm

Feature:

No sharp edges.
Easily moved, and reinstalled.
Custom colours can be supplied upon request.

Can be installed in seconds – no tools are required, the product simply clicks into place, anywhere along the length of mesh.

The radius protection provided prevents sharp bends or kinks in cables. In the case of network cables this prevents connectivity loss.

Wire Mesh Cable Tray Fast Fix Splicer Side Joiner

Apply to: Connect 2 straight sections of tray

Fit for:Diameter of wire from 4 .0 mm to 5.5mm

Feature: Connectionwith no bolt;

To be used in conjunction with Bottom Joiners to join lenghts of cable mesh together.

The published load results are based on uniformly loaded, simply supported span.

Wire Mesh Cable Tray Wall Bracket

The wall bracket is a cable tray cantilever bracket from Qinkai Manufacturing.

This heavy-duty bracket is one part of wall mounting system of wire mesh cable tray.

Compared with L-shaped wall bracket, cantilever bracket is often used for the tray over 300mm to provide a firm supporting.

Different surface finishing is also optional to match with cable tray.

The wall bracket is a cable tray cantilever bracket from Qinkai Manufacturing.
This heavy-duty bracket is one part of wall mounting system of wire mesh cable tray.

Compared with L-shaped wall bracket, cantilever bracket is often used for the tray over 300mm to provide a firm supporting.

Different surface finishing is also optional to match with cable tray.

Wire Mesh Cable Tray 50 Tray Holder

Apply to: Hang 5 0 mm width
trays under ceiling Fit for:
Diameter of wire from 3.5mm
to 6. 0mm , the width of tray is 50mm
Include: 1 unit ( rods and
nuts are optional) Feature:
Economical and easy to
install

Apply to: Use 50 hangers to hang the wire tray on the ceiling.

Only applicable to 50MM wide trunking, without screw installation. Fix with hook.

Fit for:Diameter of wire from 3.5mm to 6. 0mm ,the width of tray is 50mm

Include: 1 unit ( rods and nuts are optional)

Feature:Economical and easy to install

Wire Mesh Cable Tray 100 floor stand

Apply to: Support 100 mm trays on floor or top of cabinet，It can be fixed directly on the ground with screws.Without screw support, fixed with bending protrusion.

The type and width of wire slot shall match.

Fit for: Diameter from 3.5mmto 6.0mm ,Width> 100 mm trays

Include: 1 unit ( Optional expanding nut or bolt and nut)

Feature: Easy installation and lowcost

Apply to: Support 100 mm trays on floor or top of cabinet
Fit for: Diameter from 3.5mmto 6.0mm ,
Width> 100 mm trays

Include: 1 unit ( Optional expanding nut or bolt and nut)

Feature: Easy installation and lowcost

Wire Mesh Cable Tray Spider Bracket

Apply to: Provide various screw positions. Expansion screws can be increased or decreased as required.
Only 100mm installation space is required, which is more suitable for small space.

Include: 1 unit ( Optionalexpanding nut or bolt and nut)

Feature:Applicable to various installation environments.

Wire Mesh Cable Tray M Shape Bar Trapeze with Threaded bar

Apply to: Fix the wire tray on the screw with nuts and hang it on the ceiling.Matching of hanger length and trunking width

Fit for: Diameter of wire from 4 . 0 mm to 6.0mm

Include: 1 unit ( rods and nuts are optional)

Feature: Support without screw, Fixed with bending protrusion.

The most popular installation way is hanging under ceiling.

We can also supply wall mounting, floor mounting, standing on cabinet, standing under electrostatic floor and many other options for cable basket.

Wire Mesh Cable Tray Spider Bracket

Apply to: It is only applicable to the trunking with a width of 50MM, and also applicable to the top of the cabinet.

Fit for: Diameter from 3.5mmto 6.0mm , Width = 50 mm trays

Without screw support, fixed with bending protrusion.

Feature: Easy installation and low cost

Parameter

Qinkai wire mesh cable tray parameter

Product Parameter
Product type	Wire mesh cable tray / Basket cable tray
Material	Q235 Carbon Steel/Stainless Steel
Surface Treatment	Pre-Gal/Electro-Gal/Hot dipped galvanized/Powder coated/Polishing
Packing method	Pallet
Width	50-1000mm
Side rail height	15-200mm
Length	2000mm,3000mm-6000mm or Customization
Diameter	3.0mm,4.0mm,5.0mm,6.0mm
Color	Silver,yellow,red,orange,pink..